Table of Contents
Advertisement
Factory Reset
The Factory Reset button can reset the FT-90x back to the factory default mode. Be aware that the entire configuration
will be reset, and the IP address of the FT-90x will be set to "192.168.0.100".
Once the Factory Reset item is pressed, the screen in Figure 4-22 appears.
To reset the IP address to the default IP Address "192.168.0.100". Press the hardware reset button
Note
at the front panel about 10 seconds. After the device be rebooted. You can login the management
:
WEB interface within the same subnet of 192.168.0.xx.
Figure 4-20 Configuration restore screen
Figure 4-21 Factory Reset screen
Figure 4-22 Factory Reset screen
-31-
Hardware Reset button
Advertisement
Table of Contents
