Advertisement
Table of Contents
- 1 Fcc Warning
- 2 Table of Contents
- 3 Chapter 1 Overview
- 4 Chapter 2 Model List
- 5 Chapter 3 Checklist
- 6 Chapter 4 Product Outlook
- 7 Chapter 5 Installing the Converter
- 8 Chapter 6 Duplex Mode Setting
- 9 Chapter 7 The LED Indications
- 10 Chapter 8 Cable Connection Parameter
- 11 Chapter 9 Technical Specifications
- 12 Chapter 10 Power Information
- Download this manual
Copyright
Copyright © PLANET Technology Corp. 2004.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technol-
ogy Corp. The information in this manual is subject to
change without notice. All other trademarks belong to
their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware
will work properly in all environments and applications,
and makes no warranty and representation, either
implied or expressed, with respect to the quality, per-
formance, merchantability, or fitness for a particular
purpose.
PLANET has made every effort to ensure that this User's
Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User's Manual is subject to change
without notice and does not represent a commitment on
the part of PLANET. PLANET assumes no responsibility
for any inaccuracies that may be contained in this User's
Manual. PLANET makes no commitment to update or
keep current the information in this User's Manual, and
reserves the right to make improvements to this User's
Manual and/or to the products described in this User's
Manual, at any time without notice. If you find infor-
mation in this manual that is incorrect, misleading, or
incomplete, we would appreciate your comments and
suggestions.
FCC Warning
This equipment has been tested and found to comply
with the regulations for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this user's guide,
Advertisement
Table of Contents
Related Manuals for Planet FT-701B
Summary of Contents for Planet FT-701B
-
Page 1: Fcc Warning
PLANET has made every effort to ensure that this User‘s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have occurred. - Page 2 This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Revision User’s manual for PLANET Fast Ethernet Converter Multi-mode: FT-701B, FT-702B, FT-703, FT-704 Single-mode: FT-702S15, FT-702S35, FT-702S50, FT-703S, FT-706A15, FT-706B15 Rev 4.0 (July 2004)
-
Page 3: Table Of Contents
Table of Contents Chapter 1 Overview Chapter 2 Model List Chapter 3 Checklist Chapter 4 Product Outlook Chapter 5 Installing the Converter Chapter 6 Duplex Mode Setting Chapter 7 The LED Indications Chapter 8 Cable Connection Parameter Chapter 9 Technical Specifications Chapter 10 Power information... -
Page 4: Chapter 1 Overview
Chapter 1 Overview Thank you for purchasing PLANET FT-70X family Fast Ethernet Twisted pair to Fiber-optic Converter. This converter is used to convert one type media signal to other type equivalent that allows two type segments connect easily, efficiently and inexpensively. -
Page 5: Chapter 3 Checklist
Chapter 3 Checklist Your FT-70X carton should contain the following items: ð The Fast Ethernet Converter ð AC-DC Power Adapter (Output: 5VDC, 2 A max.) ð This user’s manual If any item is missing or damaged, please consult the dealer from whom you purchased your Fast Ethernet Converter. -
Page 6: Chapter 5 Installing The Converter
Left View (FT-70X) One DC jack for DC power input. Side View (FT-70X) One DIP Switch for TP Device selection. Chapter 5 Installing the Converter Please follow these steps to install the converter: • Turn off the power of the device/station in a network to which the FT-70X will be attached. - Page 7 • Connect the 5VDC power adapter to the FT-70X and verify that the Power LED lights up. • Turn on the power of the device/station, the TX Link and FX Link LEDs should light when all cables are attached. • RJ-45/STP, UTP Cat 5, straight-through cable is accepted.
-
Page 8: Chapter 6 Duplex Mode Setting
Chapter 6 Duplex Mode Setting The twisted pair port of FT-70X support duplex mode selection by Auto-Negotiation (A-N). The following is the duplex mode parameters: Fast Ethernet Device FT-70X Duplex Mode support Fast Ethernet Hub Half-Duplex Fast Ethernet Switch Half-Duplex (without A-N) Fast Ethernet Devices * Full-Duplex / Half-Duplex... -
Page 9: Chapter 7 The Led Indications
Chapter 7 The LED Indications Color Status Description If fiber-optic is not present Blinks for converter self-diagnose / detecting If both ports link with any TP Blinks packets transmitting TP ACT Green Fiber-optic link is present With no TP/FX LINK on, i.e. only turn on the power and the ACT do not blink at all, please... -
Page 10: Chapter 8 Cable Connection Parameter
Chapter 8 Cable Connection Parameter The cable distance limitations are as below: Duplex Connection Limitation (max.) Twisted Pair Node to Node Half / Full 100 meters Node to Switch/Hub Multi-Mode Converters Node to Node MM Half* 412 meters Node to Switch Node to Node MM Full 2 kilometers... -
Page 11: Chapter 9 Technical Specifications
The FT-70X comes with the following features: IEEE 802.3u, 100Base-TX and Standard 100Base-FX One RJ-45 Twisted Pair, EIA568 TP Connector connectors FT-701B: ST FT-702B: SC FT-702S series: SC Fiber Connector FT-703 series: MT-RJ FT-704 series: VF-45 FT-706A/FT-706B series: single SC... -
Page 12: Chapter 10 Power Information
The power jack of FT-70X is with 2.5mm in the central post and required +5VDC / 2A power input. It will conform to the bundled AC-DC adapter and PLANET s Media Chassis. Should you have the problem to make the power connection, please contact your local sales representative. - Page 13 This page is intentionally left blank...
- Page 15 2010-000001-003...