Table of Contents
Advertisement
The Loop Back Test Parameters includes the following fields:
• Send Packet
Number
• Result
• Result Counter
These counters will be cleared when a new auto loop back test procedure is issued
Note
:
After field the parameter and press "Apply" to execute the Loop Back Test function. The result shows at the next table. As
the Figure 4-14 screen appears.
: Be sure the partner converter had enabled the Loop Back Reply. Otherwise, the result screen will
Note
as like fiber above.
Figure 4-13 Loop Back Test screen
number of loop back test packet to send.
Enter the
0~255: (default 16)
PC reports the loop back test result after sending all test frames.
The possible values are : PASS and Fail
number of good looped-back packet received
Shows
Figure 4-14 Ping Result screen
-28-
Advertisement
Table of Contents
