Planet FT-801 User Manual

Planet FT-801 User Manual

Fast ethernet converter, multi-mode and single-mode
Hide thumbs Also See for FT-801:

Advertisement

Quick Links

Copyright
Copyright (C) PLANET Technology Corp. 2003.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technol-
ogy Corp. The information in this manual is subject to
change without notice. All other trademarks belong to
their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware
will work properly in all environments and applications,
and makes no warranty and representation, either
implied or expressed, with respect to the quality, per-
formance, merchantability, or fitness for a particular
purpose.
PLANET has made every effort to ensure that this User's
Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User's Manual is subject to change
without notice and does not represent a commitment on
the part of PLANET. PLANET assumes no responsibility
for any inaccuracies that may be contained in this User's
Manual. PLANET makes no commitment to update or
keep current the information in this User's Manual, and
reserves the right to make improvements to this User's
Manual and/or to the products described in this User's
Manual, at any time without notice.
If you find information in this manual that is incorrect,
misleading, or incomplete, we would appreciate your
comments and suggestions.

FCC Warning

This equipment has been tested and found to comply
with the regulations for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not

Advertisement

Table of Contents
loading

Summary of Contents for Planet FT-801

  • Page 1: Fcc Warning

    All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, per- formance, merchantability, or fitness for a particular purpose.
  • Page 2 This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Revision User’s manual for PLANET Fast Ethernet Converter Multi-mode: FT-801, FT-802 Single-mode: FT-802S Rev 3.0 (May.2003) Part No. 2010-000002-002...
  • Page 3: Table Of Contents

    Table of Contents Overview Model List Checklist Product Outlook Installing the Converter Duplex Mode setting LED indication Cable Connection Parameter FT-80X Technical Specifications Power information...
  • Page 4: Overview

    Model List Your Fast Ethernet Converter comes with one of the following models. ð FT-801: on board ST fiber connector ð FT-802/S: on board SC fiber connector Models with last character “S” indicate the fiber-port is with “Single-Mode” optic fiber connector.
  • Page 5: Product Outlook

    Product Outlook Right View There are one RJ-45 Twisted-Pair jack (Auto-MDI/MDI-X), one fiber-optic connector and six LED indicators. Left View One DIP switch for Fiber-optic mode operating selection, FDX for full-duplex, and HDX for half-duplex.
  • Page 6: Installing The Converter

    Installing the Converter Please follow these steps to install the converter: · Turn off the power of the device/station in a network to which the FT-80X will be attached · Ensure that there is no activity in the network · Attach fiber cable from the FT-80X to the fiber network.
  • Page 7: Duplex Mode Setting

    Duplex Mode setting The TP port of FT-80X supports duplex mode detection by auto- negotiation (A-N). The following is the duplex mode parameters: FT-80X Duplex Fast Ethernet Device Mode support Ethernet / Fast Ethernet Hub Half-Duplex Ethernet / Fast Ethernet Switch Half-Duplex (without A-N) Fast Ethernet Devices *...
  • Page 8: Led Indication

    LED indication COLOR DESCRIPTION Blinks: when any FX packets trans- FX LNK / mitting and receiving Green Lit: when Fiber connection is good Blinks: when any TP packets trans- TX LNK / mitting and receiving Green Lit: when TP connection is good Lit: when Full-duplex mode is en- FX FDX Green...
  • Page 9: Cable Connection Parameter

    Cable Connection Parameter The limitations are as below: Duplex Connection Limitation (max.) Twisted Pair Node to Node Half / Full 100 meters Node to Switch/Hub Multi-Mode Converters Node to Node MM Half 412 meters Node to Switch Node to Node MM Full 2 kilometers Node to Switch...
  • Page 10: Ft-80X Technical Specifications

    FT-80X Technical Specifications The FT-80X comes with the following standard features: · Standard: IEEE802.3/u, 10/100Base-TX and 100Base-FX · Connectors: ð One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568 ð One Fiber-optic, 1300nm wavelength, connector- type vary with model · Data Transfer Rate : 10/100Mbps ( TP), 100Mbps (FX) ·...
  • Page 11: Power Information

    Power information The power jack of FT-80X is with 2.5mm in the central post and required +5VDC power input. It will conform to the bundled AC- DC adapter and Planet’s Media Chassis. Should you have the problem to make the power connection, please contact your local sales representative.
  • Page 12 Part No.:2010-000002-002...

This manual is also suitable for:

Ft-802sFt-802

Table of Contents