Craftsman 247.288862 Operator's Manual page 106

Theenginewill automatically s hut off if the PTO (Blade Engage) l everis
movedinto the engaged (ON)positionwith the shift leverinReverse.
Ignition Switch
Theignition switchisactivated to startthe engine.Insertkeyintothe ignition
switchandturn clockwise to the START p osition.Release the keyintothe ON
positiononceenginehasfired. SeeFigure 8.
Tostopthe engine,turn the ignitionkeycounterclockwise to the OFF position.
Neverleavearunning machineunattended.AlwaysdisengagePTO, m ove
shift leverintoneutral position, set parkingbrake,stopengine and remove
keyto prevent unintended starting.
f
Setting the Cutting Height
1. Select t he heightpositionof the cuttingdeckbyplacingthe decklift leverin
anyof thedifferentcutting heightnotches on the rightsideof the fender.
2. Adjustthe deckwheelssothatthey arebetweenl_-inchand1/2-inch a bove
the groundwhenthe tractorison asmooth, f lat surface suchasadriveway.
To adjust Deck Wheels:
1. Remove t he flangelocknut on the shoulder b olt securing the deckwheel.
2. Position the wheelto the desiredheightaslistedabove. S eeFigure 9.
3. Secure theshoulder bolt with the flangelocknut.
Keephandsandfeet away from the dischargeopening of the cutting
deck.
off
On
Start
Figure 8
Engagingthe ParkingBrake
Toengage the parking brake:
1. Fullydepress t he brakepedal a ndholdit downwith yourfoot.
2. Movethe speed controlleverall the waydown andintothe parkingbrake
position.
3. Release t he brakepedalto allowthe parkingbrake to engage.
Toreleasethe parking brake:
1. Depress t he brakepedal a ndmovethe speed controlleverout of the parking
brakepositionandinto adesired speed.
NOTE: Thedeckwheels areananti-scalp featureof the deckandarenot designed
to supportthe weightof the cuttingdeck.Referto Leveling inthe Maintenance a nd
Service sectionof thismanual f ormoredetailedinstructions regarding various deck
adjustments.
Starting the Engine
Figure9
J
Donotoperatethe tractor if the interlock systemismalfunctioning. This
systemwasdesignedfor your safetyandprotection.
NOTE: R efer t o the Gasoline andOilfill-up instructions earlierinthissection.
1. Insertthe tractorkeyinto the ignition switch.
2. Place the PTO (Blade Engage) l everinthe disengaged (OFF) position.
3. Engage the tractor'sparkingbrake.
4. Activatethechokecontrol bymoving thethrottle/chokeleverall thewayupinto
the chokeposition.
5. Turnthe ignition keyclockwise to the START p osition. A fterthe enginestarts,
release the key.It will returnto the ON(orNormal M owing)position.
14