GE Appliances Profile PFDS450 Owner's Manual And Installation Instructions page 7

GEAppliances.com
Dry Temp
You can change the temperature of your dry cycle.
ANTI-BACTERIAL
This option may only be used with COTTONS or MIXED LOAD cycles. This option reduces
certain types of bacteria by 99.9%, including: Staphylococcus oureus, Pseudomonos
oeruginoso and Ktebsiello pneumonioe*. The anti-bacterial process occurs when high
heat is used during a portion of this drying cycle.
NOTE: Do not use this cgcle on delicate fabrics.
* The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation
Foundation) to NSF Protocol P154 Sonitizotion Performance of Residential Clothes Dryers.
Sanitization Perfbrmance ot
Residential Clothes Dryers
HIGH
MEDIUM
LOW
EXTRA LOW
START/PAUSE
For regular to heavy cottons.
For synthetics, blends and items labeled permanent press.
For delicates, synthetics and items labeled Tumble Dry Low.
For lingerie and special-care fabrics.
Press to start a dry cycle. If the dryer is running, press it once and it will pause the dryer.
Press it again to resume the dry cycle.
cMv_
YCLE
STORE MY CYCLE ÷
I -I
My Cycle (on some models)
Set up your favorite combination of settings and save them here for one touch recall.
These custom settings can be set while a cycle is in progress.
To store a MY CYCLEcombination of settings:
1. Select your drying cycle.
2. Change DRY TEMP and SENSORDRY settings to fit your needs.
3. Select any drying OPTIONSyou want.
4. Press and hold the MY CYCLEbutton for 3 seconds to store your selection. A beep will sound
the button will light up, and the unit will display "My cycle is now programed with the current cycle
settings".
To recall gour stored MY CYCLEcombination:
Press the MY CYCLEbutton before drying a load. The light in the center of the button will light up when
MY CYCLEis selected.
To change gour stored MY CYCLE combination:
Follow Steps !-4 in "To store a MY CYCLE combination of settings."
Display
Special Cycle Status OR Est. Cycle Time
g Dryer Rack ORTimed Dry ORTime to Dry
De ]y Time Lint Filter DELAY TIME
lib Status Status Screen
"CLEAN LINT FILTER" (message)
This message appears periodically. It is only a reminder.
After the POWER button is
pressed, the CLEAN LINT FILTER
message could appear if the
previous cycle was not finished.
This message will disappear
after the STARTbutton is
pressed. Even though you have
already cleaned the filter (before
the POWER button was pressed),
the CLEAN LINT FILTER message
will still be displayed until the
STARTbutton is activated.
7