GE Appliances Profile PFDS450 Owner's Manual And Installation Instructions page 37

Installation instructions
r31 REVERSE DOOR HANDLE
AND CAPS (CONT.)
E Reassemble the outer handle to the inner handle,
using 3 screws (#8 x 0.625" tapping screws).
Outer
handle
F Assemble the new right-side door cap
(from reversibility kit), using 2 screws
(#8 x 0.625" tapping screws).
2xDScrews ,
Door cap
Put the chrome cover aside on a soft, protected
flat surface.
[_ REVERSE HINGE AND CAPS
, Lay the inner door down on a soft, protected flat
surface so that the inner part faces down.
Disassemble the outer window by opening 2
snaps, lay the outer window on a soft, protected
flat surface.
. Disassemble the inner cover (mask) by opening 2
snaps, lay the inner cover (mask) on a soft,
protected flat surface.
REVERSE HINGE AND CAPS (CONT.)
, Turn the inner door on a soft, protected flat
surface so that the inner part faces up.
, Remove the screws, nuts and washers on the
opposite side of the hinge, using a quadrex
screwdriver.
, Disassemble the inner door cap from the inner
door by removing 2 screws (#8 x 0.75" tapping
screws).
, Disassemble the hinge from the inner door
by removing 4 screws (#8-32 x 0.50" machine
screws).
Inner
cap
2xD
37