GE Appliances Profile PFDS450 Owner's Manual And Installation Instructions page 41

Installation Instructions
STACKINGTHE WASHER AND
DRYER(if desired)(cont.)
INSTALLING THE STACK
BRACKET KIT
KIT GE FL STACK CONTENTS
0 Right hand bracket
El Left hand bracket
04 #8 x 1/2" screws
04 rubber pads
TOOLS YOU WILL NEED
El Phillips screwdriver
ClOpen-ended wrench
OGIoves
OPliers
El Level
INSTALLATION PREPARATION
Remove the packaging.
Flatten the product carton to use as a pad to lay
the dryer down on its side. Continue using the
carton to protect the finished floor in front of
the installation location.
[] REMOVE THE DRYER LEVELING LEGS
A. Carefully lay the dryer on its side. Use the
packing material so you don't scratch the finish
on the dryer.
Bo Use an open-end wrench or pliers to remove
the dryer leveling legs.
Back out and remove
all 4 leveling legs
[Z] INSTALL RUBBER PADS
TO DRYER BASE
Locate the 4 rubber pads in the parts package.
Remove the adhesive backing and firmly place
over on the bracket where you removed the
leveling legs.
41