GE Appliances Profile PFDS450 Owner's Manual And Installation Instructions page 36

Installation Instructions
REVERSING THE DOOR SWING
[_ REVERSE DOOR HANDLE
AND CAPS
A Lay the chrome cover down on a soft,
protected, flat surface so that the inner part
faces upward (resting on the handle side).
Disassemble the door cap from the chrome
cover on the handle side by removing 2 screws
(#8 x 0.625" tapping screws).
2xD
Screws
Door cap
Disassemble the outer handle from the inner
handle by removing 3 screws (#8 x 0.625"
tapping screws). Disassemble the inner handle
from the chrome cover by removing 4 screws
(#8 x 0.625" tapping screws).
3xD
Screws
(Outer
Inner
handle
(if desired)
[if] REVERSE DOOR HANDLE
AND CAPS {CONT.}
C Pop the 2 handle caps out toward you and
reassemble on the opposite side of the chrome
cover, where you removed the outer handle.
D Assemble the inner handle onto the opposite side
of the chrome cover, using 4 screws
(#8 x 0.625" tapping screws).
Inner
handle
36