GE Appliances Profile PFDS450 Owner's Manual And Installation Instructions page 39

Installation Instructions
REVERSING THE DOOR SWING (if desired}
[] REINSTALL DOOR ASSEMBLY
Place the door back on the dryer front panel,
making sure the latch is engaged and the hinge
is sitting in the two openings in the dryer front.
Assemble the door to the front cabinet, using
2 screws (#10 x 0.75" tapping screws).
Install the new left-hand hinge cap (from the
reversibility kit) onto the hinge, by opening the dryer
door and screwing the hinge cap into place.
NOTE: Save the remaining cops and covers in case
you wont to reverse the hinge again.
Hinge cap
i x C Screw
in hinge cap
39