GE Appliances JGB500 Owner's Manual And Installation Instructions page 48

Installation Instructions
[] ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations Where Appliance Power Cord Will
Be Disconnected Frequently.
Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual failure of the adapter
ground terminal. The customer should have the 2-prong
wall receptacle replaced with a 3-prong (grounding)
receptacle by a qualified electrician before using the
appliance.
The installation of appliances designed for mobile home
installation must conform with the Manufactured Home
Construction and Safety Standard, Title 24 CFR,Part 3280
(formerlg the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD, Part 280) or,
when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-Ups),
ANSI A225.1, latest edition, or with local codes. In Canada,
mobile home installation must be in accordance with
the current CAN/CSA Z240/MH Mobile Home
Installation Code.
Electric Disconnect
• Locate disconnect plug on the range back.
• Pinch sides of connector and pull out of range back.
I%-ISEAL THE OPENINGS
Seal ang openings in the wall behind the range and in the
floor under the range when hookups are completed.
15] ASSEMBLE SURFACE BURNERS
r_J Burner Heads (on some models}
Placeburner heads over the electrodes on the cooktop,
in the correct locations according to their size.There is
one small,
one
medium,
one large
and one
extra-large
burner
head.
Large bead __
_ron_OT range (on s)
Extra-largehead
[] ASSEMBLE SURFACE BURNERS (CONT.)
Make surethe slot in the
burnerhead is positioned
overthe electrode.
or Hole
Electrode !
Electrode ;_ Slot
Front right burner
(on some models)
[] Oval (Center} Burner Head/Cap Assembly
Placethe oval (center) head/cap assemblg over the
electrode on the cooktop.
Ovalheadandcap
assembly
• ®
Frontof range
Make surethe slot inthe
burner headis positioned over
the electrode.
Electrode
[] Caps
Placethe matching size caps onto the burner bases
or heads.
c
Frontof range
Make sure that the heads (on some models) and caps
are replaced in the correct locations.
[] Grates
Placethe left, right and center grates on the cooktop.
These grates are position specific.The undersides of
the left and right grates are marked "LEFTFRONT" and
"RIGHTFRONT." P lacethe middle grate with its bowed
front toward the front of the range.
Left Front Center RightFront
CAUTION:
Do not operate the burner
without all burner parts in place.
48