Basic Operation (Play Back); Selecting An Input Source; Selecting The Surround Mode; Adjusting The Main Volume - Marantz SR5400 User Manual

BASIC OPERATION
(PLAY BACK)

SELECTING AN INPUT SOURCE.

Before you can listen to any input media, you must
first select the input source on the SR5400.
Example : DVD
ER SR5400
POWER
TV
CLEAR MEMORY TUNING F/P MODE
VIDEO OFF 6.1CH INPUT A/D S-DIRECT DISPLAY TUNER
TV DVD VCR1 DSS/VCR2 AUX CD-R TAPE CD TUNER
TV
VOL.
OSD
To select DVD, simply press the DVD button on the
front panel or press the DVD button on the remote.
After you have selected DVD, simply turn on the
DVD player and play the DVD.
• As the input source is changed, the new input
name will appear momentarily as OSD information
on the video display. The input name will also
appear in the display, on the front-panel.
• As the input is changed, the SR5400 will
automatically switch to the digital input, surround
mode, attenuation, and night mode status which
were entered during the configuration process
for that source.
• When an audio source is selected, the last video
input used remains routed to the VCR1 & DSS/
VCR2 Outputs and Monitor Outputs. This
permits simultaneous viewing and listening to
different sources.
• When a Video source is selected, the video
signal for that input will be routed to the Monitor
Outputs jacks and will be viewable on a TV
monitor connected to the SR5400.
If a component video input is connected to the
DVD or DSS component inputs, it will be routed
to the Component Video Output. Make certain
that your TV is set to the proper input to view the
signal.
20

SELECTING THE SURROUND MODE

Example : AUTO SURROUND
AV SURROUND RECEIVER SR5400
SELECTOR
CLEAR MEMORY
VIDEO OFF 6.1CH INPUT
SELECT ENTER
TV DVD VCR1 DSS/V
STANDBY
POWER ON/OFF PHONES
To select the surround mode during playback, turn
VCR1 DSS/VCR2 DVD
the SELECT knob on the front panel or press the
CD TAPE CDR/MD
surround mode button on the remote .
AUX AMP
MAIN
SLEEP MUTE VOL.

ADJUSTING THE MAIN VOLUME

MENU
VOLUME
DOWN UP
F/P MODE
S-DIRECT DISPLAY
MUTE ATT
TUNER
CD-R TAPE CD
AUX INPUT
S-VIDEO VIDEO L AUDIO R
Adjust the volume to a comfortable level using the
VOLUME control knob on the front panel or VOL
/ buttons on the remote.
To increase the volume, turn the VOLUME knob
clockwise or press VOL button on the remote, to
decrease the volume, turn counterclockwise or press
VOL button on the remote.
Notes:
• The volume can be adjusted within the range of – ∞
to 18 dB, in steps of 1 dB.
• However, when the channel level is set as described
on page 18, if the volume for any channel is set at
+1 dB or greater, the volume cannot be adjusted up
to 18 dB.
(In this case the maximum volume adjustment
range is "18 dB - Maximum value of channel level)
ADJUSTING THE TONE (BASS &
TREBLE) CONTROL.
OK
AV SURROUND RECEIVER SR5400
SELECTOR
SETUP/ MENU OFF
T.TONE
S-DIRECT AUTO DTS
1 2 3
CLEAR MEMORY
NIGHT CSII EX/ES DSP
4 5 6
VIDEO OFF 6.1CH INPUT
SELECT ENTER
DISPLAY M-CH ST STEREO 6.1CH IN
7 8 9
TV DVD VCR1
STANDBY
CLEAR MEMO A/D P.SCAN
POWER ON/OFF PHONES
0
CHANNEL/SKIP
BASS TREBLE TUNE/SEARCH
During a listening session you may wish to adjust
the Bass and Treble Control to suit your listening
tastes or room acoustics.
(Using the SR5400)
To change the selector mode , press the SELECT
button, until "BASS" or "TREBLE" is shown on the
front display.
Turn the SELECTOR knob to the desired level of
tone control.
TV VCR1 DSS/VCR2 DVD
(Using the remote control unit)
TUNER CD TAPE CDR/MD
To adjust the bass effect, press BASS or BASS
AUX AMP on the remote.
TV MAIN
To adjust the treble effect, press TREBLE or
VOL. SLEEP MUTE VOL.
TREBLE on the remote.
OSD MENU
Notes :
OK
• The tone control function can work in the AUTO
Surround, Stereo, Dolby PL2, DTS, DTS-ES, and
Multi Ch. Stereo mode.
TEMPORARILY TURNING OFF THE
SOUND
S-DIRECT AUTO DTS
1 2 3
NIGHT CSII EX/ES DSP
4 5 6
DISPLAY M-CH ST STEREO 6.1CH IN
7 8 9
CLEAR MEMO A/D P.SCAN
0
DOWN
F/P MODE
CHANNEL/SKIP
S-DIRECT DISPLAY
MUTE
BASS TREBLE TUNE/SEARCH
DSS/VC
TAPE CD TUNER
S-VIDEO
MODE DISP./RDS F.DIRECT
+/A /ANT –/B /VCR ATT. PTY
DISC/DECK
To temporarily silence all speaker outputs such as
when interrupted by a phone call, press the MUTE
button on the front panel or MUTE button on the
remote.
This will interrupt the output to all speakers and the
head-phone jack, but it will not affect any recording
or dubbing that may be in progress.
When the system is muted, the display will show
"MUTE" .
Press the MUTE button again to return to normal
operation.
TV VCR1 DSS/VCR2 DVD
VOLUME
TUNER CD TAPE CDR/MD
UP
AUX AMP
TV MAIN
VOL. SLEEP MUTE VOL.
ATT
AUX INPUT
VIDEO L AUDIO R
OSD MENU
OK