Connections; Important Information - Marantz SR6006 Getting Started

Connections

Important information

• Make connections as follows before using this unit. Select an
appropriate connection type according to the devices to be
connected.
• You may need to make some settings on this unit depending
on the connection method. Refer to each description for more
information.
• Select the cables (sold separately) according to the devices
being connected.
NOTE
• Do not plug in the power cord until all connections have been
completed (When the Setup wizard is running, follow the instructions
in the Setup wizard screen for making connections. ).
• When running the Setup wizard, turn off the power supply of
connected devices.
• When making connections, also refer to the operating instructions of
the other devices being connected.
• Be sure to connect the left and right channels properly (left with left,
right with right).
• Do not bundle power cords together with connection cables. Doing
so can result in noise.
Converting input video signals for output (Video conversion function)
This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors
(HDMI, Component video and video).
Use the connectors corresponding to the devices to be connected.
This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from
this unit to a monitor.
Video device
Output
HDMI connector
Component video
connectors
Video connector
5
GFlow of video signals for MAIN ZONEH
This unit
Input Output
(IN)
(MONITOR OUT)
HDMI
HDMI connector
connector
Component video Component video
connectors connectors
Video connector Video connector
: when 480i/576i signals are input
Monitor (TV)
Input
HDMI connector
Component video
connectors
Video connector
vSee overleaf