Setting Amp Characteristics - Marantz M-CR603 User Manual

ENGLISH
Symbols used to indicate buttons in this guide
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
o/p u/i 8 9
<ENTER>
[iPod/USB]
[TUNER]
8
[MENU]
u
o
i
34
Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + (red) and –
BUTTON
(black) polarities on the speakers being connected to the unit, and be
<BUTTON>
sure to connect the channels and polarities correctly.
[BUTTON]
13
<5>
<VOLUME df>
[DISC]
13
9
[ENTER/MEMO]
p
[NUMBER]
Adjusting the audio level balance between
speakers A and B
With the output of Speaker A fi xed, the audio level of Speaker B can
be adjusted within the range –6 dB to +6 dB.
1 Press
Turns on the Menu settings mode and the Menu appears on the
display. (vpage 26 "Menu map")
ui
2 Use
"Volume Offset", then press
<ENTER>
ui
3 Use
MEMO]
[Adjustable range]
-6 dB, 0 dB, +6 dB

Setting AMP characteristics

• Amp properties can be changed according to the location speakers
are installed.
• Five types of characteristics can be selected.
• Different characteristics can be selected for Speaker A and Speaker B.
1 Press
Turns on the Menu settings mode and the Menu appears on the
M-CR603 display. (vpage 26 "Menu map")
ui
2 Use
"Response", then press
p
or .
ui
3 Use
then press
[Selectable items]
FLAT
RESPONSE 1
RESPONSE 2
RESPONSE 3
RESPONSE 4
Setting the others [Other]
[MENU] .
to select "Other"-"Speaker Setup"-
[ENTER/MEMO]
p
or .
to ajust volume offset, then press
, or p .
<ENTER>
[MENU] .
to select "Other"-"Speaker Setup"-
,
[ENTER/MEMO] <ENTER>
to select the characteristics you want to set,
, or p
[ENTER/MEMO] <ENTER>
Properties are fl at. (Default)
This enhances bass frequencies when speakers are
placed directly on furniture or on a rack.
If you feel that there is too much bass, select your
favorite properties from among RESPONSE1 to
RESPONSE4.
Cuts low frequencies 60 Hz or under by –12 dB/oct.
Cuts low frequencies 100 Hz or under by –12 dB/oct.
Cuts low frequencies 60 Hz or under by –12 dB/oct.
Also, raises the 400 Hz region by 3 dB.
Cuts low frequencies 100 Hz or under by –12 dB/oct.
Also, raises the 400 Hz region by 3 dB.
,
[ENTER/
.