Adjusting The Clock Automatically [Clock]; Setting The Time Zone; Setting The Summer Time; Auto Adjust - Marantz M-CR603 User Manual

Adjusting the clock automatically [Clock]

You can automatically adjust the clock of this unit using the Internet.
To use this function, the unit must be connected to the Internet.

Setting the Time Zone

Use the following procedure to select your local standard time (time
zone).
Press .
[MENU]
1
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 26 "Menu map")
Use ui to select "Clock"-"Auto Adjust"-"Time
2
Zone", then press
[ENTER/MEMO]
"Time Zone Menu" appears.
ui
3 Use to select your time zone, then press
, or p
[ENTER/MEMO] <ENTER>
The setting is entered.

Setting the Summer Time

Use the following procedure to set Summer time if the Summer time
system is used in your country.
Press .
[MENU]
1
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 26 "Menu map")
ui
2 Use to select "Clock"-"Auto Adjust"-"Summer
Time", then press
[ENTER/MEMO]
"Summer Time Menu" appears.
ui
Use to select "Off (0H)" or "On (+1H)", then
3
press [ENTER/MEMO] , <ENTER>
The setting is entered.

Auto Adjust

Use the following procedure to automatically adjust the clock.
Press .
[MENU]
1
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 26 "Menu map")
ui
2 Use
Now", then press
The operation to receive the current time starts.
• The current time is displayed for several seconds when it is received
successfully.
• If the current time is not received successfully, "Connection Failed"
appears.
Setting the current time (Manual Adjust)
(24-Hour Display)
p
, or .
<ENTER> 1 Press [MENU]
Turns on the Menu settings mode and the Menu appears on the
display. (vpage 26 "Menu map")
2 Use ui
.
press
[ENTER/MEMO]
ui
3 Use to set the "hours".
4 Press
[ENTER/MEMO]
The "minutes" display fl ashes.
ui
5 Use to set the "minutes".
6 Press
[ENTER/MEMO]
The current time is set, and the normal display reappears.
, or p .
<ENTER>
n Checking the current time when the power is on
[CLOCK]
Press .
Press once more and the display returns to its original condition.
p
or .
n Checking the current time when the power is
set to standby
[CLOCK]
Press .
The current time is displayed for 30 seconds.
NOTE
The time cannot be set when in the standby mode. Turn on the power
fi rst.
to select "Clock"-"Auto Adjust"-"Adjust
, or
[ENTER/MEMO] <ENTER>
.
to select "Clock"-"Manual Adjust", then
p
, or .
<ENTER>
, or p .
<ENTER>
p
, or .
<ENTER>
p .
ENGLISH
29