The Wireless Receiver Connection; Remote Control Connection; Setting The Remote Control - Marantz M-CR603 User Manual

The wireless receiver connection

By connecting a wireless receiver RX101 (sold separately) to this unit,
you can receive and playback audio signals from other devices using
the Bluetooth Communication Function.
• Use a Bluetooth device that is A2DP compatible.
• You can also use wireless receiver RX101 as an external IR receiver.
• For instructions on the wireless receiver settings, refer to the
RX101's operating instructions.
Wireless receiver
RX101
Bluetooth device
(A2DP Compatibility)
Remote control unit
When you connect RX101 to M-XPort on this unit, the function
switches to M-XPort.

Remote control connection

The unit can be controlled using the remote sensor of RX101 connected
to the unit. Be sure to set "IR=DISABLE" when controlling in this way.
NOTE
When making this remote control connection, be sure to set the IR
switch of RX101 that is connected to the unit, to ON.

Setting the remote control

1 Press .
[MENU]
Turns on the Menu settings mode and the Menu appears on the
display. (vpage 26 "Menu map")
ui
2 Use to select "Other"-"IR Setting"-"Disable",
then press ,
[ENTER/MEMO] <ENTER>
To restore original settings, repeat steps 1 and 2, select "ENABLE"
and press <ENTER> .
NOTE
The unit cannot be controlled using the remote controller while
"DISABLE" is set.
or p .
ENGLISH
27