Tuner Playback; Tuning In Broadcast Stations; Automatically Presetting Fm Stations (Auto Preset) - Marantz M-CR603 User Manual

ENGLISH
Symbols used to indicate buttons in this guide
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
o/p u/i
<ENTER>
<INPUT>
[TUNER]
[TU-] [TU+]
2
[CH df]
[MODE]
u
[ENTER/MEMO]
o p
i
[SEARCH]
[NUMBER]
16

Tuner playback

Tuning in Broadcast Stations

BUTTON
<BUTTON>
Connect the antenna beforehand (vpage 7).
[BUTTON]
1 Press [TUNER] to select the reception band.
2
Tune in the desired broadcast station. (FM/AM only)
2
When a station is received, the "
q
To tune in automatically (Auto tuning)
[MODE]
Press to light the "AUTO" indicator on the display, then
use [TU –, TU +] to select the station you want to hear.
w
To tune in manually (Manual tuning)
[MODE]
Press to turn off the display's "AUTO" indicator, then use
[TU –, TU +] to select the station you want to hear.
• If the function is set to something other than "TUNER", press
[TUNER]
to switch the function to "TUNER".
• The function can also be switched to "TUNER" using
o p
.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
change frequencies continuously.
• A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
n To stop auto tuning
Press [TU –, TU +] .
DAB FM
AM
" will light.
<INPUT> and
[TU –, TU +]
to
Automatically presetting FM stations
(Auto preset)
This unit can be preset with a total of 99 DAB, FM and AM broadcast
stations.
NOTE
Auto preset is not possible with AM broadcast stations.
n Auto presetting with the remote control
Perform this operation when tuned to an FM broadcast station.
1 Press [SEARCH] .
"Search menu" is display.
ui
2 Use to select "Auto Preset"-"Start", then press
p
[ENTER/MEMO] , <ENTER> or
After "Searching" is displayed, "Complete" is displayed.
Canceling auto presetting
2
[TUNER]
Press or .
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
NOTE
When FM auto preset is performed, the channel currently registered
as the FM auto preset is deleted, and the newly preset FM broadcast
station is registered to the same number as the deleted channel.
n Giving station names to preset channels
Names of up to 8 characters can be input.
You cannot give a station name to DAB stations.
Tune in the preset channel you want to name.
1
2 Press and hold [ENTER/MEMO] or
The display switches to the station name input display.
Input the station name.
3
"Inputting characters" (vpage 35)
4 Press or
[ENTER/MEMO] <ENTER>
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 4.
.
<ENTER> .
.