Basic Operations; Preparations; Turning The Power On; Turning The Power Off - Marantz M-CR603 User Manual

Basic operations

Symbols used to indicate buttons in this guide
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
ON/STANDBY
ON/STANDBY
This section provides information on basic operations such as
settings and playback procedures.
For other operations, see the sections below.
BUTTON
n RDS (Radio Data System) (vpage 25)
<BUTTON>
n Setting the timer [Timer] (vpage 28)
[BUTTON]
n Setting the others [Other] (vpage 32)

Preparations

Turning the power on

Press .
ON/STANDBY
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time, either press
unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.
n Completely turning off the power
Unplug the power cord from the wall outlet.
• Note that the time setting is cleared when the power cord is
unplugged from the outlet.
• The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.

Turning the power off

Press .
ON/STANDBY
NOTE
• Be sure to stop playback before turning the power off.
Setting the current time (Auto Adjust)
(24-Hour Display)
• When the unit is connected to the Internet, the current time is set
automatically.
• The default Time Zone setting of this unit is the Central European
Time zone.
To change the Time Zone and Summer Time, see "Adjusting the
clock automatically [Clock]" (vpage 29).
• When the unit is not connected to the Internet, set the current time
manually. See "Setting the current time (Manual Adjust) (24-Hour
Display)" (vpage 29).
ON/STANDBY to turn off the power, or
ENGLISH
11