Making Individual Calls (Digital) (Nx-200/Nx-300 Only); Receiving Group Calls (Digital); Receiving Individual Calls (Digital) - Kenwood NEXEDGE NX-200 Instruction Manual

Making Individual Calls (Digital) (NX-200/ NX-300 Only)
Individual + Status
persons.
1 Press the key programmed as Individual or
Individual + Status.
2 Press
• On keypad models, you can enter a unit ID directly.
3 Press and hold the PTT
•
transmission.
RECEIVING
Select the desired zone and channel. If signaling has been
if the received signal matches your transceiver settings.
Note:
" " on page 27 for details.

Receiving Group Calls (Digital)

When you receive a group call on a Conventional channel
and the received group ID matches the ID set up on your
transceiver, you can hear the caller's voice.
When you receive a group call on a Trunking channel, the
channel to receive the call.

Receiving Individual Calls (Digital)

the PTT
during a normal transmission.
to select a unit ID from the list.
Individual or