SCAN REVERT
press the PTT
•
Selected: The last channel selected before scan.
•
Selected + Talkback: Same as "Selected", plus you can
•
Priority 1/ Priority 2:
•
Priority 1 + Talkback/ Priority2 + Talkback: Same as
•
Last Called + Selected:
receive a call.
SCAN DELETE/ADD
and from your scan list.
1
2 Press the key programmed as Zone Delete/Add
•
You can also press and hold the key programmed as Scan
Delete/Add
PRIORITY-CHANNEL SELECT (NX-200/ NX-300 ONLY)
If the Priority channel has been set as Operator Selectable by
your dealer, you can reprogram the Priority channels.
1
2 Press the key programmed as Priority-channel Select.
3 Press
4 Press
or Scan Delete/Add
19