Kenwood NEXEDGE NX-200 Instruction Manual page 6

Uhf/vhf digital transceiver
Hide thumbs Also See for NEXEDGE NX-200:
Table of Contents

Advertisement

Turn the transceiver power off in the following locations:
Near explosives or blasting sites.
In aircrafts. (Any use of the transceiver must follow the
instructions and regulations provided by the airline crew.)
Where restrictions or warnings are posted regarding the use of
radio devices, including but not limited to medical facilities.
Near persons wearing pacemakers.
Turn the transceiver power off in the following locations,
unless the model is specifically qualified for such use
(Intrinsically Safe such as approved by Factory Mutual, CSA):
metallic powders, grain powders, etc.).
While taking on fuel or while parked at gasoline service stations.
Do not remove the black sheet from the reverse side of the
transceiver (refer to the illustration below). Removal of this
may cause malfunctions if water seeps into the transceiver.
The orange seal on the reverse side of the transceiver is
transceiver. Do not place stickers or other materials on or
of the transceiver and may cause it to break down. Additionally,
in order to prevent damage to the seal, do not allow it to come
in contact with foreign materials.
iii

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexedge nx-300Nexedge nx-200sNexedge nx-300s

Table of Contents