Menu Mode (Nx-200/300/200G/300G/205G/305G Only); Menu Access; Menu Configuration - Kenwood NEXEDGE NX-200 Instruction Manual

MENU MODE (NX-200/300/200G/300G/205G/305G ONLY)

Many functions on this transceiver are selected or configured through
the Menu instead of physical controls. Once you become familiar with
the Menu system, you will appreciate the versatility it offers.

MENU ACCESS

1 Press the key programmed as Menu.
• The category list is shown.
• When there is only 1 category, the function list is shown
(proceed to step 4).
2 Press
• On keypad models, you can enter a category number directly.
3 Press
4 Press
• On keypad models, you can enter a function number directly.
5 Press
• Press
6 Press
• For settings with more than 1 level, repeat steps 5 and 6.
7 Press
or
• Press
• Press

MENU CONFIGURATION

Some transceiver keys may already be programmed with
functions listed in the Menu. Those functions can be accessed
directly by pressing the key. All other functions can still be
accessed using the transceiver Menu. The following table lists
the available Menu items.
Display
2-TONE
AUTO REPLY MSG
AUTO TELEPHONE
AUTO DIAL
AUTO DIAL PROG
AUX
BROADCAST
/ to select a category item.
to view the function list.
or
/ to select a function item.
to set up the selected function item.
or
or # to return to the category list.
/ to select your desired setting.
to set the selected setting and exit Menu mode.
or # at any time to return to the previous display.
at any time to exit Menu mode.
2-tone Mode
Auto Reply Message ON/OFF
Auto Telephone
Autodial Mode
Autodial Programming Mode
AUX ON/OFF
Broadcast ON/OFF
Description
15