Making Individual Calls (Nxdn/ Dmr) - Kenwood NX-1700N-C User Manual

Making Individual Calls (NXDN/ DMR)

You can select a Unit ID/ name from the list to make a call to those parties on a
channel.
1 Press the button programmed as [Individual], [Individual + Short Message]
or [Individual + Status] to enter Individual Call Mode.
Alternatively, press the button programmed as [Menu] to enter Individual
•
Call Mode using the Menu Mode.
• The ID list appears on the display.
2 Press the [ <B ] and [ C> ] buttons to select a Unit ID/ name from the list that
has been programmed into your transceiver.
3 Press and hold the PTT switch to make the call.
• The " " indicator blinks. The ID name of the target transceiver are
displayed.
• Speak to the microphone as you would during a normal call.
17