SATO TG3 Series Quick Manual page 36

Section 6: Basic Specifications
Power supply
Noise (EMC) standard
Wireless standard
Temperature and humidity
environment
Options
Interface board
Optional communication
interface boards
LCD specifications
Operation keys
Page 6-6
Specification
Input power voltage: AC 100 to 240 V ±10% (full range)
Rated input voltage: AC 100 to 240 V (full range)
At peak times: 118.1 Volts AC/118.1 Watts (printing rate:
30%)
In standby: 25.6 Volts AC / 23.5 Watts (input power voltage
state: 100 V / 50 Hz)
FCC 15B Class B
Wireless LAN (2.45 GHz): FCC15B Class B
HF band RFID: FCC 15B / FCC 15C
UHF BAND RFID: FCC15B / FCC15C
Usage environment: 41° to 95° F / 5° to 35° C, and 30 to
80% RH (without condensation)
Storage environment: 41° to 140° F / -5° to 60° C, and 30 to
90% RH (without condensation)
* These ranges do not apply to supply products.
(1) Large stacker (ST-TG3)
(2) External rewinder (RWG500)
(3) RFID kit (HF band specification / UHF band specifica-
tion)**
(4) Simple input device (Keypad) **
(5) Ribbon core compatibility kit
(1) Communication interface (1 slot)
(2) External connector (for optional devices)
(3) RS-232C D-sub 9-pin type (for simple input device (Key-
pad) only)
(1) RS-232C (high-speed) interface board
(2) IEEE1284 (ESP/compliant) interface board
(3) LAN interface board
(4) Wireless LAN interface board *
(5) USB interface board (FULL SPEED compatible)
Graphic LCD (128 x 64 dots) with side light
Online, Feed/OK, Cutter ON, Eject Cut, Setting Mode, Select
Paper, Orientation (4)
TG3 Series Quick Guide