SATO TG3 Series Quick Manual page 33

Ribbon size and type
Carbon ribbon
Fonts installed as standard
bitmap fonts
TG3 Series Quick Guide
Specification
Ribbon length:
1,476 feet (450 m) roll maximum
Ribbon width:
3.31 inches (84 mm) maximum
Winding direction:
Both forward and reverse winding
Take-up method:
Coreless (standard)
Use a carbon ribbon specified by SATO.
For text comprised of letters, numbers and symbols:
TG308 X1 text: 20 x 15 dots
TG312 X1 text: 30 x 75 dots
TG308 X2 text: 8 x 20 dots
TG312 X2 text: 13 x 30 dots
TG308 X3 text: 13 x 21 dots
TG312 X3 text: 20 x 32 dots
WB text: 18 x 30 dots
WL text: 28 x 52 dots
TG308 OCR-A: 15 X 22 dots
TG312 OCR-A: 22 X 33 dots
TG308 OCR-B: 20 x 24 dots
TG312 OCR-B: 30 x 36 dots
For text comprised of numbers, "$ ¥ - , ") italics:
X70 text: 32 x 48 dots
X71 text: 40 x 60 dots
X72 text: 48 x 72 dots
X73 text: 64 x 96 dots
For text comprised of numbers, "$ ¥ - , "):
X74 text: 32 x 48 dots
X75 text: 40 x 60 dots
X76 text: 48 x 72 dots
X77 text: 64 x 96 dots
Section 6: Basic Specifications
Page 6-3