SATO TG3 Series Quick Manual page 32

Section 6: Basic Specifications
Media size
Outer diameter of paper or
Roll size
Page 6-2
Specification
Label
Continuous type
Length:
0.6 to 9.3 inches (backing liner: 0.7 to 9.4 inches) / 16 to 237
mm (backing liner: 19 to 240 mm)
Width:
0.9 to 3.1 inches (backing liner: 1.0 to 3.3 inches) / 22 to 80
mm (backing liner: 25 to 83 mm)
Label
Cutter
Length:
0.9 to 9.3 inches (backing liner: 1.0 to 9.4 inches) / 22 to 237
mm (backing liner: 25 to 240 mm)
Width:
0.9 to 3.1 inches (backing liner: 1.0 to 3.3 inches) / 22 to 80
mm (backing liner: 25 to 83 mm)
Tag stock
Continuous
Length:
1.0 to 9.4 inches (25 to 240 mm)
Width:
1.3 to 3.3 inches (32 to 83 mm)
Tag stock
Cutter
Length:
1.0 to 9.4 inches (25 to 240 mm)
Width:
1.3 to 3.3 inches (32 to 83 mm)
Size restrictions may apply, depending upon the conditions of
use.
Label paper
ø10 inches (ø 250 mm) maximum
Core inner diameter:
ø 3 inches (ø 76.4 mm), ø 4 inches (ø102 mm)
Tag stock
ø10 inches (ø 250 mm) maximum
Core inner diameter:
ø 3 inches (ø 76.4 mm), ø 4 inches (ø102 mm)
Fanfold paper
Maximum folding height:
7.9 inches (200 mm)
TG3 Series Quick Guide