Argox X-1000VL User Manual page 47

3. "Cutter Setup" prompts will be indicated as below.
Check on the radio button, "Rotary" if there's Rotary Cutter
installed.
Then click "OK":
Check on the radio button, "Guillotine" if there's Guillotine
Cutter installed. Then click "OK":
93
4. Go to "Printing Preference" prompt of CP-2140 driver and then
click on the "Stock" tag. Check "Post-Print Action" settings and
select "Cut".
※ If there's Guillotine Cutter installed and partial cut function is
needed, select "Partial Cut" in "Post-Print Action".
94