IBM System x3650 M3 4255 Service Manual page 270

3. Connect the hard disk drive backplane power cables to the connector in front of
4. Install the screw into the safety cover.
5. Install the SAS riser-card assembly (see "Installing the SAS riser-card and
6. Install the server cover (see "Installing the cover" on page 178).
7. Slide the server into the rack.
8. Reconnect the external cables; then, reconnect the power cords and turn on the
252
IBM System x3650 M3 Types 4255, 7945, and 7949: Problem Determination and Service Guide
the safety cover.
controller assembly" on page 198).
peripheral devices and the server.