Table of Contents
Advertisement
INSTALLATION AND SETUP
STEP 6!
Zoom
Focus
V
H
2.2
Installation Considerations
Although this projector delivers a high brightness quality output, final display quality could be
compromised if the projector is not properly installed. This subsection discusses issues you
should consider before proceeding with a final installation. Even if you do not intend to use the
projectors in a fixed and permanent installation, this subsection will help you to better understand
what you can do to enhance display performance.
Lifting
For any new installation, you will likely have to safely lift the projector into place. Keep in mind
that the projector is quite heavy, and the aid of a CO2 or other type of mechanical lift is highly
recommended.
Adjust Image
! ZOOM: With the input image displayed, rotate the textured ring on
the lens barrel to increase or decrease the image size (this requires a
zoom lens). If you don't have a zoom lens or you can't adjust the
image enough, the projector may not be positioned at the proper throw
distance for your screen size. Power down, unplug the projector and
move it towards or away from the screen. See 2.3, Projector Position
and Mounting for details.
! FOCUS: At the lens opening, turn the focus tab to focus the image
clearly.
! OFFSETS: Turn either or both of the adjustment screws (with the
provided hex driver) adjacent to the lens if you need to align the image
with your screen-turn the top screw to raise or lower the image. Turn
the bottom screw to shift the image left or right. Re-check focus.
! OTHER: Press
in Section 3.
Menu
to refine other display parameters as described
2-2
Advertisement
Table of Contents
