Table of Contents
Advertisement
Specify the lengths of rhythm tones and notes and their
loudness.
12. Press the [TR-REC] button to turn off the indicator.
The keyboard pads have been switched to work as
ordinary keys (i.e., keys used to specify the scale).
SNARE
1
2
3
4
5
6
7
KICK
13. By pressing the relevant keyboard pads, select the
rhythm tones you want to enter.
* By pressing the [OCT (-/+)] button, you can use Rhythm
tones other than those of the octave for the keyboard
pads currently being played.
* For more on the correspondence between each Rhythm
tone and Mute button, refer to P. 159.
14. Upon selection of rhythm tones, press the [TR-REC]
button second time to return the MC-307 to the
Recording mode.
(Now, the keyboard pads have been switched back to the
mode in which you set the note input timing.)
1
2
3
4
5
6
7
15. Using Assignable knob [3], determine the type of note for
the note message to be entered.
Available Settings:
16. Using Assignable knob [4], determine the gate time
(length of sound) for the note message to be entered.
You determine this value in proportion to the gate time
and the length of note appearing on the display. For
example, if you want 80%, enter the note message whose
length is 80% of the note you selected in Step 9.
Available Settings: 5 - 200%
17. Using Assignable knob [2], determine the velocity
(loudness) for the note message to be entered.
The higher the value, the louder the sound.
Available Settings: 1 - 127
HI-HAT
CRASH
8
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
TOM
8
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
Chapter 5 Creating Your Own Patterns and
18. Press the button corresponding to the timing at which
you want to enter the note message to illuminate its
indicator and then enter the data.To erase the data, press
the button to turn off its indicator.
* Use the [
] or [
measure (or the position in the measure) to be recorded.
When a rhythm divided into sixteenth notes or eighth
note triplet has been selected with the [SCALE] button,
one press of the [
position of the measure to shift one measure.
When a rhythm divided into 32nd notes or sixteenth
note triplet has been selected with the [SCALE] button,
one press of the [
position of the measure to shift half a measure.
19. When recording has finished, press the [STOP] button.
Procedure for selecting rhythm set
Using the Recording screen, carry out the following
operations.
Procedure
1. Press the [PACH] button.
The "RHYTHM" screen appears.
2. Select a rhythm set using the [VALUE] dial or the [INC/
DEC] buttons.
3. Upon selection, press the [EXIT] button to return to the
Recording screen.
] buttons to shift the position of the
] or [
] button causes the
] or [
] buttons causes the
69
Advertisement
Chapters
Table of Contents
