Rhy View - Roland Groovebox MC-307 Reference Manual

Chapter 7 Environment Configuration and
Using the RHYTHM PART VIEW button
as the MUTE CTRL part button

(RHY VIEW)

There is a special "MUTE CTRL part" that is used to record
data for operations such as "switching the MUTE buttons
on/off," "tempo changes," and "system exclusive messages."
If desired, you can make settings so that the RHYTHM PART
VIEW button will function as the MUTE CTRL part button.
Procedure
1. Press the [SYSTEM] button and then the [F1 (SYS)]
button.
A screen will appear in which you can select system
setting items.
2. Use the [CURSOR(up)] button to access items 1–4.
3. Press the [F3 (SEQ)] button.
One of the "SYSTEM: SEQ" screens will appear.
4. Press the [F4 (PRM4)] button.
5. Use the [CURSOR(up/down)] buttons to move the
cursor to "RHY VIEW."
6. Use the [VALUE] dial or the [INC/DEC] buttons to set
the value.
Range:
- NORMAL:
The button will function as the RHYTHM PART VIEW
button.
- MUTE CTRL:
The button will function as the MUTE CTRL button.
* In the case of Microscope (P. 72) and Pattern Editing (P. 76),
the button will always function as the MUTE CTRL button
regardless of this setting.
Parameter Type: Backup parameters
Turning off tap tempo (TAP SW)
Specify whether or not [TAP] button can be used to modify
the tempo (BPM). With a setting of "OFF," it will not be
possible to use [TAP] button to modify the tempo.
Procedure
1. Press the [SYSTEM] button, then the [F1 (SYS)] button.
The selection screen for system settings appears.
2. Press the [CURSOR (up)] button to access the screen for
items 1–4.
122
3. Press the [F3 (SEQ)] button.
One of the SYSTEM: SEQ set-up screens appears.
4. Press the [F4 (PRM4)] button.
5. Use the [CURSOR (up/down)] buttons to move the
cursor to "TAP SW."
6. Specify a value using the [VALUE] dial or the [INC/
DEC] buttons.
Range: OFF, ON
Parameter Type: Backup parameters
Changing the resolution of the tap
tempo (TAP RESOLUTION)
This specifies the basic note value that will be used when the
TAP button is used to modify the tempo. When you press the
TAP button, the tempo will be changed to intervals of the
specified note value.
Procedure
1. Press the [SYSTEM] button, then the [F1 (SYS)] button.
The selection screen for system settings appears.
2. Press the [CURSOR (up)] button to access the screen for
items 1–4.
3. Press the [F3 (SEQ)] button.
One of the SYSTEM: SEQ set-up screens appears.
4. Press the [F4 (PRM4)] button.
5. Use the [CURSOR (up/down)] buttons to move the
cursor to "TAP RESOLUTION."
6. Specify a value using the [VALUE] dial or the [INC/
DEC] buttons.
Range: ,
Parameter Type: Backup parameters