Useful Functions (Utilities); Initializing Patches, Rhythm Tones And Patterns (Initialize); Initializing Rhythm Tones; Copying Patch Tones And Rhythm Tone (Copy) - Roland Groovebox MC-307 Reference Manual

Chapter 7 Environment Configuration and

Useful Functions (Utilities)

* It is not possible to enter these set-up screens while a pattern
or song is being played back.
Initializing Patches, Rhythm
Tones and Patterns (INITIALIZE)
Initializing patches and patterns
Procedure
1. First, select the patch or pattern to be initialized (P. 17, P.
21).
2. Press the [SYSTEM] button.
3. Press the [F2 (UTIL)] button.
4. Press the [CURSOR (up)] button.
The "1 INITIALIZE" screen appears.
5. Press the [F1 (INIT)] button.
The screen for selecting what to initialize appears.
6. Use the [CURSOR (up/down)] buttons to select
"PATCH" or "PATTERN," then press [F4 (SEL)] button.
The "ARE YOU SURE?" message appears.
7. Press [F4 (EXEC)] button.
Initialization is performed.

Initializing rhythm tones.

Procedure
1. First, select the rhythm set containing the rhythm tone be
initialized (P. 21).
2. Press the [SYSTEM] button.
3. Press the [F2 (UTIL)] button.
4. Press the [CURSOR (up)] button.
The "1 INITIALIZE" screen appears.
5. Press the [F1 (INIT)] button.
The screen for selecting what to initialize appears.
6. Use the [CURSOR (up/down)] buttons to select
"RHYTHM."
7. Press the [OCT (-/+)] to set the key range, then Press one
of the pads [1] to [16] to select the key to be initialized.
128
8. Press the [F4 (OK)] button.
The "ARE YOU SURE?" message appears for confirmation.
9. Press [F4 (EXEC)] button.
Initialization is performed.
Copying Patch Tones and Rhythm
Tone (COPY)
This function duplicates patch tones and rhythm keys.
Operating procedure
1. Select destination Patch or Rhythm set.
(refer to Selecting Patch/Rhythm Set (p. 21).)
2. Press the [SYSTEM] button.
3. Press the [F2 (UTIL)] button.
4. Press the [CURSOR (up)] button.
The "2 COPY" screen appears.
5. Press the [F2 (COPY)] button.
The "PATCH TONE COPY" appears if any of parts [1] to
[7] is selected, and the "RHYTHM TONE COPY" screen
appears if part [R] is selected.
6. On the "PATCH TONE COPY" screen, select the patch/
patch tones of the copy source (upper line) and the
destination (lower line) patch.
On the "RHYTHM TONE COPY" screen, select the
rhythm set/tone numbers of the copy source (upper line)
and the destination tone(lower line).
7. Press the [F4 (OK)] button.
The "ARE YOU SURE?" message appears for
confirmation.
8. Press [F4 (EXEC)] button.
Copying is performed.