Multi-Effects (M-Fx); Switching Multi-Effects On/Off; Applying Multi-Effects For Each Part (Part M-Fx Switch) - Roland Groovebox MC-307 Reference Manual

Chapter 4 Setting Effects

Multi-Effects (M-FX)

Multi-effects provides 25 different Effect Types, each of
which let you apply a different effect. Described here is how
to enter the M-FX-related settings.

Switching Multi-Effects On/Off

Procedure
1. Press the [SYSTEM] button.
The System Parameter Menu screen appears.
2. Press the [F1 (SYS)] button.
3. Press the [CURSOR (up)] button to access the screen for
items 1-–4.
4. Press the [F1 (SND)] button.
5. Use [F3 (
)] and [F4 (
following
screen.
6. Move the cursor to the "M-FX SW."
7. Use the [VALUE] dial or the [INC/DEC] buttons to set a
parameter.
8. Select the part you want to use Multi-effects on. For info
on how that's done, see the subsequent section,
"Applying Multi-Effects for Each Part (Part M-FX
Switch)."
Range: OFF, ON
There are a number of places where settings can be made that
affect the M-FX level and related switches. If the effect does
not work with the above settings, check whether:
- If the M-FX OUTPUT LEVEL setting is low (P. 48 -
P. 61), the sound of the patch/rhythm set to which
M-FX is applied will not be heard.
- The effect is not applied when the GRAB switch is
positioned at OFF if the MC-307 has been set to use
the GRAB switch (P. 34). To always make the
effect take effect, put the GRAB switch at ON.
- Confirm that the "DELAY Volume for Each Part"
in the next item is not set too low.
46
)] buttons to select the
Applying Multi-Effects for Each
Part (Part M-FX Switch)
Specifies whether to switch the M-FX on and off for each
part.
Procedure
1. Press the [PTN] button.
The screen for playing patterns appears.
2. Press the [F2 (STUP] button.
3. Press the [F1 (PART)] button.
4. Use [F1 (
)] and [F2 (
MIXER: M-FX SW" screen.
5. Press the [PART SELECT] button, then press the part
button ([R], [1] to [7]) for the part you want to set.
* Instead, you can select the part with the [CURSOR (right/
left)] buttons.
6. Use the [VALUE] dial or the [INC/DEC] buttons to set a
parameter.
Range:
- OFF: Switches Multi-effect off.
- ON: Switches Multi-effect on.
- RHY: Specify this to apply Multi-effect to each
rhythm tone. You can select RHY for the rhythm
parts only.
To turn M-FX on/off for individual rhythm tones.
(refer to "SEND: M-FX SW" (p. 112))
)] buttons to select the "PART