Table of Contents
Advertisement
CHAP Settings provides an option you can use to set the CHAP option as
follows:
NOTE:
ISR645610-00 B
Product Revision shows the product revision as reported by the SCSI
INQUIRY command.
IP shows the IP of the presented iSCSI target.
iSCSI Name shows the presented iSCSI target's name.
Target Path shows the router's iSCSI port where the target was
discovered.
Enable CHAP check box allows you to enable CHAP when connecting
to this target.
CHAP Secret is the string used for the CHAP secret when connecting
to this target. The box is available only when the Enable CHAP check
box is selected.
If you change the CHAP Settings, you must click Save for the change
to take effect.
3–Viewing Router Information
iSCSI Discovered Targets
3-33
Advertisement
Table of Contents
