Qlogic iSR6152 User Manual page 124

B–Log Messages
ID
70499
#%d: QLProcessResponseQueue: Invalid
handle for ET_PASSTHROUGH_STATUS
70501
#%d: QLProcessResponseQueue: Invalid
entry type in response queue %x
70502
#%d: QLProcessResponseQueue: Invalid
handle %x EntryType %x
70524
#%d: QLProcessAen: Invalid event %x
70544
#%d: QLRebootTimer: Reboot failed!
70563
#%d: QLRebootTimer: Reboot failed!
70564
#%d: QLRebootTimer: Reboot failed!
70609
#%d: QLRebootTimer: Reboot failed!
70610
#%d: QLProcessSystemError: RebootHba
failed
70784
#%d: QLConfigChip: invalid NVRAM
70835
#%d: QLStartFw: MBOX_CMD_SET_FLASH failed
%x
70836
#%d: QLStartFw: Invalid Fw loader state
0x%x
70837
#%d: QLStartFw: Load Fw loader timeout
B-14
Table B-1. iSR6152 Router Log Messages (Continued)
Log Message
Module Msg.
Type Type
iSCSI Fatal Response queue invalid handle for ET pass-through.
iSCSI Fatal Response queue invalid entry type.
iSCSI Fatal Response queue invalid handle for specified entry
type.
iSCSI Fatal Asynchronous event for unknown event type.
iSCSI Fatal Reboot timer failed.
iSCSI Fatal iSCSI driver missed iSCSI processor heartbeat.
iSCSI processor rebooted.
iSCSI Fatal iSCSI processor failed to complete operation before
timeout.
iSCSI Fatal iSCSI processor system error restart.
iSCSI Fatal iSCSI processor reboot failed.
iSCSI Fatal iSCSI processor NVRAM invalid (checksum error).
iSCSI Fatal iSCSI controller Set Flash command failed.
iSCSI Fatal iSCSI controller failed to load firmware.
iSCSI Fatal iSCSI controller firmware load operation timed out.
Description
ISR645610-00 B