Router Isr6152; Information - Qlogic iSR6152 User Manual

3–Viewing Router Information

Router iSR6152

Router iSR6152
The top of the SANsurfer Router Manager router tree in the left pane identifies the
connected iSR6152 by serial number. Click the router in the left pane to view the
following tabbed pages in the right pane:
 "Information" on page 3-2
 "SNMP Management" on page 3-10
 "Features" on page 3-12
NOTE:
The Assigned Remote Router page appears only if your router's
configuration includes a remote router. To define additional remote routers,
use the Add Remote Router Wizard.

Information

The Information page for the router contains four vertical tabs on the left edge with
icons that identify the content of each subpage. Click a vertical tab to open the
corresponding subpage:
At the bottom of the Information page are buttons that function as follows:
 Click Reboot to reboot the router.
 Click FW Load to open the Firmware Load dialog box and update the router
firmware.
 Click Restore Defaults to revert to the factory-set router options.
 Click Reset Mappings to remove all mappings between initiators and LUNs.
3-2
Basic Information
Management Information
NTP Server Information
Security
ISR645610-00 B