Qlogic iSR6152 User Manual page 136

B–Log Messages
ID
139304
QBRPC_Initialize:NtpStats Mem Allocation
error
139305
QBRPC_Initialize:LunList MemAlloc error
139315
QBRPC_FreeResources:Entered
139553
checkDuplicateIp: Detected
Error %08x %08x%04x
139930
FcipRoute#%d Failed with Memory
Allocation Error
139931
FcipRoute#%d Failed with Invalid Arg Error
139932
FcipRoute#%d Failed with Unknown Device
Error
139933
FcipRoute#%d Failed with Kernel Error
139934
FcipRoute#%d Failed with Network
Configuration Error
139935
FcipRoute#%d Failed with Persistence Read
Failure
139936
FcipRoute#%d Failed with Persistence
Write Failure
139937
FcipRoute#%d Failed with IP Address Reuse
Error
B-26
Table B-1. iSR6152 Router Log Messages (Continued)
Log Message
Module Msg.
Type Type
User Error Failed memory allocation for NTP Status API.
User Error Failed memory allocation for LUN List API.
User Error RPC free resources entry point.
User Error Detected duplicate IP address for management port.
App Error FCIP route add/mod failed because of lack of mem-
ory.
App Error FCIP route add/mod failed because the arguments
supplied were incorrect.
App Error FCIP route add/mod failed because of incorrect con-
figuration.
App Error FCIP route add/mod failed because of configuration
error.
App Error FCIP route add/mod failed because of the Ethernet
network.
App Error FCIP route add/mod failed because of an error in
reading the saved configuration from persistence.
App Error FCIP route add/mod failed because of an error in
writing the route configuration to persistence.
App Error FCIP route add/mod failed because an IP address
supplied is already under use.
Description
ISR645610-00 B