Qlogic iSR6152 User Manual page 114

B–Log Messages
ID
41268
QLIS_LoginPduContinue: Missing target
name
41270
QLIS_LoginPduContinue: TSIH is 0 but
InitiatorName key/value not provided
41272
QLIS_LoginPduContinue:
CONN_STATE_IN_LOGIN, Unknown InitTaskTag
41283
QLIS_LoginPduContinue: TSIH 0x%x out of
range
41284 QLIS_LoginPduContinue: Session does not
exist, invalid TSIH 0x%x
41353
QLIS_LoginPduContinue: Session does not
exist, invalid TSIH 0x%x
B-4
Table B-1. iSR6152 Router Log Messages (Continued)
Log Message
Module Msg.
Type Type
App Error iSCSI Login PDU received without a target name for
a normal session.
App Error iSCSI Login PDU received without an initiator name
key/value.
App Error iSCSI Login PDU received with an incorrect initiator
task tag for a session that is partially logged in. This
error would occur if a login PDU other than the initial
login PDU used an initiator task tag that was different
from the initiator task tag provided in the initial login
PDU.
App Error iSCSI login PDU was received with a target session
identifying handle (TSIH) out of range. This error
would occur if the iSCSI initiator attempting the login
failed to used the TSIH value provided in the Target
Login Response PDU (router is target) in subsequent
login PDUs.
App Error iSCSI Login PDU was received with an invalid TSIH
value. The TSIH is invalid because there is no ses-
sion with that TSIH value. This error would occur if
the iSCSI initiator attempting the login failed to used
the TSIH value provided in the target login response
PDU (router is target) in subsequent login PDUs.
App Error iSCSI Login rejected due to a CHAP authentication
error.
Description
ISR645610-00 B