Starting SANsurfer Router Manager on Windows
On a Windows system, do one of the following to start the SANsurfer tool, which
includes the SANsurfer Router Manager user interface.
To start SANsurfer Router Manager on Windows:
Use one of the following options:
Double-click the SANsurfer Router Manager icon on your desktop (if the
icon was created during installation):
On the Windows Start menu, point to Programs, point to QLogic
Management Suite, and then click SANsurfer Router Manager.
The SANsurfer Router Manager main window opens (see
page
Starting SANsurfer Router Manager on Linux or Solaris
On Red Hat/SUSE Linux and Solaris SPARC/x86 systems, follow these steps to
start SANsurfer Router Manager.
To start SANsurfer Router Manager on Linux or Solaris:
1.
Ensure that you are in a graphical user environment, such as Xwindows.
2.
Open a command terminal.
3.
Change to the directory where you installed SANsurfer Router Manager.
4.
Type SANsurferRouterManager, and then press ENTER.
The SANsurfer Router Manager main window opens (see
page
Starting SANsurfer Router Manager on Macintosh
On Macintosh systems, follow these steps to start SANsurfer Router Manager.
To start SANsurfer Router Manager on Macintosh:
1.
Open Finder.
2.
Browse to the folder where you installed SANsurfer Router Manager.
3.
Double-click the SANsurfer Router Manager icon:
ISR645610-00 B
2-2).
2-2).
1–Getting Started
Starting SANsurfer Router Manager
"Main Window" on
"Main Window" on
1-5