Qlogic iSR6152 User Manual page 118

B–Log Messages
ID
42404
QLIS_InstantiateSession: Maximum number
(%d) of allowed hosts already logged in
42648
QLIS_HandleTeb: Driver Fatal Error
42649
QLIS_HandleTeb: Unload Driver
42654
QLIS_HandleTeb: iSNS Connection Failed
43265
QLUT_AllocateTpbExtension: TPB allocation
failed
43267
QLUT_AllocateTpbExtension: Alloc of DSD
failed for buffer len %d
43268
QLUT_AllocateTpbExtension: Data buffer
allocation failed (length %d)
44549
QLDM_HandleMigError: Migration Job %d
stopped for Src Lun %hd Dest Lun %hd Error
%x AdditionalErrorStatus %x at line %d
53254
System Booting Up.
53357
QLBA_ProcessTpb: De-compression failed.
Disabling compression temporarily
B-8
Table B-1. iSR6152 Router Log Messages (Continued)
Log Message
Module Msg.
Type Type
App Error Failed to execute iSCSI Command PDU because its
CmdSN is out-of-range. Log message contains the
incorrect CmdSN, the valid CmdSN range, the first
byte of the CDB, and the data length.
App Error Event notification; iSCSI driver encountered a fatal
error.
App Error Event notification; an IOCTL request was received to
unload the iSCSI driver.
App Error Event notification; attempt to connect to the iSCSI
name server (iSNS) failed.
App Error Failed to allocate memory for TPB extension.
App Error Failed to allocate data segment descriptor (DSD)
(buffer length %d).
App Error Failed to allocate data buffer (length %d).
App Error An error occurred on an I/O that was issued for a
migration job. The message provides the job ID,
source, and destination LUN IDs, as well as the error.
App Info Router is booting up.
App Info Decompression failed. Disabling compression tem-
porarily.
Description
ISR645610-00 B