Qlogic iSR6152 User Manual page 143

ID
205571
QL3xxx:%s: Auto Negotiation error
detected
205572
QL3xxx:eth%d: Unsupported speed
portConfig 0x%x
206080
QL3xxx:ql3xxx_probe: cannot allocate
ethernet device %s
206089
QL3xxx:ql3xxx_probe: cannot register
network device %s
206114
QL3xxx:eth%d: TCP/IP checksum error -
TotalChecksumErrorCount = %lu
217856
QL3xxx:%s: PHY Downshift occurred
217857
QL3xxx:%s: Link Up
217858
QL3xxx:%s: Link Down
218389
QL3xxx:%s Adapter Down
218401
QL3xxx:%s Adapter Up
233473
"memory monitor: Detected Uncorrectable
Ecc %08lx system is rebooting in 5 secs\n"
233474
"Failed to register interrupt handler!\n"
233475
"%s class_simple_create failed\n"
ISR645610-00 B
Table B-1. iSR6152 Router Log Messages (Continued)
Log Message
Module Msg.
Type Type
NIC Error Ethernet port was not able to negotiate the config-
ured speed.
NIC Error Ethernet port speed is not supported.
NIC Error Ethernet device could not be configured.
NIC Error The Ethernet port was not able to register as a net-
work device, resulting in a port initialization error for
the specified network device.
N IC Error The total number of TCP checksum errors detected
on the Ethernet link belonging to the eth#%d port.
NIC Info Ethernet port is operating at 100mbps speed.
NIC Info Ethernet link is up.
NIC Info Ethernet link is down.
NIC Info Ethernet port is down.
NIC Info Ethernet port is up.
System Fatal Uncorrectable memory error detected at address pro-
vided in log message.
System Fatal Attempt to register the interrupt handler failed.
System Fatal Failed class_simple_create system call from
memory monitor initialization routine.
B–Log Messages
Description
B-33