Table of Contents
Advertisement
10
MENU SCREEN OPERATION
D Auto gateway setting
Turn the gateway auto set function ON or OFF for calling a
specific station in the DR mode. This function enables the
transceiver to set the pre-programmed gateway repeater as
the linked repeater "RPT2" automatically.
• OFF
: After selecting a specific station, the trans-
ceiver sets the same RPT2 as previous time.
(default)
• AUTO
: After selecting a specific station, the trans-
ceiver sets the pre-programmed gateway
repeater as RPT2 automatically.
D RX call sign display
When a call is received, the calling station call sign can be
displayed automatically.
136
D TX call sign display
Selects call sign display function from YOUR, MY and OFF.
When this setting is set to YOUR or MY, the transceiver au-
tomatically displayed the set station or your own call sign dur-
ing DV mode transmission.
D RX message display
Sets auto received message display function AUTO or OFF.
When this setting is set to AUTO, the transceiver automati-
cally displays and scrolls the received message.
(default: AUTO)
D Scroll speed
Set the displayed message, call sign, etc. scrolling speed.
• SLOW : Scroll speed is set to slow.
• FAST
: Scroll speed is set to fast.
(default)
(default: YOUR)
(default: AUTO)
Advertisement
Table of Contents
