Table of Contents
Advertisement
8
SCAN OPERATION
D Programming scan edges via the microphone
z Push [MR/CALL] to select the memory mode.
MW
x Select scan edge channel, 0A to 24A using
[Y]/[Z] or keypad.
• Push [
ate digit key(s), [
L)] then push [
to select scan edge channels. "M" and "#" can be used
for "A" and "B" respectively.
c Set the desired frequency in the VFO mode.
Push [VFO/LOCK] to select the VFO mode.
Set the frequency via the keypad or [Y]/[Z].
[EXAMPLE]: Programming 145.800 MHz into scan edges 4A.
Push
Push
104
C(T-OFF)] then push only 1 or 2 appropri-
ENT
0(TONE-2)] to [
Y
VOL
SIMP
M(TONE-1)] or [
Z
VOL
SQL
Push
, then push
v Push [FUNC], then push and hold [
to program.
• 3 beeps sound and the VFO is automatically selected.
• Memory channel number advances to the next scan edge chan-
nel, 0B to 24B when continuing to push [
9(16-KEY-
gramming.
#(16KEY-L)]
Z
b To program a frequency for the other scan edge channels,
repeat steps z to v.
Push
then
for 1 sec. and continue to push
A(MW)] for 1 sec.
CLR
CLR
Push
A(MW)] after pro-
Advertisement
Table of Contents
