Scanning A Document Using The Wia Driver (For Windows ® Xp/ 7/ Windows Vista ® ); Wia Compliant; Scanning A Document Into The Pc - Ricoh SP 1200SF User Manual

Scanning a document using the WIA driver
(For Windows

WIA compliant

®
For Windows XP/ 7/ Windows Vista
images from the machine. You can scan images directly into the PaperPort™ 11SE viewer that is included
with your machine or you can scan images directly into any other application that supports WIA or TWAIN
scanning.

Scanning a document into the PC

There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the
scanner glass. (See Pre-Scanning to crop a portion you want to scan using the scanner glass on page 35.)
a
Load your document.
b
Start the ScanSoft™ PaperPort™ 11SE software that was installed during the Multi-Function Suite
installation to scan a document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft™ PaperPort™ 11SE. The
scanning steps may vary when using other software applications.
c
Click File, then Scan or Get Photo. You can also click the Scan or Get Photo button.
The Scan or Get Photo panel appears on the left side of the screen.
d
Click Select button.
e
Choose the scanner you are using from the Available Scanners list.
Note
Choose WIA-TYPE 1200SF (WIA-TYPE 1200S).
f
Check the Display scanner dialog box on the Scan or Get Photo panel.
g
Click Scan.
The Scanner Setup dialog box appears.
®
XP/ 7/ Windows Vista
®
you can choose Windows
®
)
®
Image Acquisition (WIA) for scanning
Scanning
2
2
2
2
33