6: Motion Detect; 8: System Function; 1: Time Set - Q-See QSDR74RTB User Manual

5.2.7.6: Motion Detect

(Picture 57)
Channel STATUS: This option allow you enable motion detection on any channel.
SENSITIVITY: This option allows you to set sensitivity level of motion detection from 1 to 4 with 4 being the most
sensitive.
(Picture 58)

5.2.8: System Function

(Picture 59)

5.2.8.1: Time Set

(Picture 60)
Clicking on the MOTION icon in the Device Management interface
(Picture 32) will allow you to configure your Motion Detection settings.
Once you click on the icon a pop up MOTION DETECTION Setup
interface as illustrated in Picture 57 will appear and you will be able to
configure the various settings directly through here.
detection] Menu has three sections, including Channel Status, Sensitivity
and Motion area.
MD AREA: This option allows you select the area you want to be sensitive to
motion. The area is separated into a 13*10 grid as depicted in Picture 58. When
any object moves into the area you have designated to protect, recording will be
triggered. You can choose which areas to protect by clicking on the individual
squares of the grid (as illustrated by the red blocks chosen in Picture 58). Motion
triggered recording will not occur in the area outside of the chosen grid (as
illustrated by the semi-transparent blocks in Picture 58).
The Main Menu interface (Picture 4) allows you to access the System Setup
menu by clicking on the System icon. The System Setup menu (Picture 59)
gives you access to these sub-menus to configure their settings individually:
Time Set, User Password, Audio/Video Setting, Language select, System Info
and System Maintenance.
Click the [Main menuSystemDate/Time] in turn to Enter into the time setup
menu shown as Picture 60. In the Time Setup menu, you can modify your
system date and time; set the date/time and time zone format, and enable
daylight savings time.
Please note that you must select the correct time zone from the Time Zone
drop-down menu or your time management software will not run properly. For
example, Los Angels Area is GMT-8.
settings can be found at www.time.gov.
27
QSDR74RTB User Manual
More information about time zone
The [Motion