Alarm Set - Q-See QSD9004V User Manual

Picture 5-31
OVERWRITE: If you select "on" the system will automatically overwrite the oldest recordings once the
hard drive is full; if you select "off", recording will stop once the hard drive is full.
HDD FORMAT: You use this option to format the hard drive, you can not record files to the hard drive
until it has been formatted. Click [Format HDD] button to start formatting. When selecting [Format HDD]
option the system will prompt you – "Format HDD will loss all the data, do you confirm?" ; click "OK", system
will prompt you – "Is formatting..." and "successful format"; and then system will restart automatically.
USB FORMAT: Use this option to format USB devices.

5.2.6.2 Alarm Set

Picture 5-32
not external sensors to record on motion detection.
HDD LOSS: Options are On and Off. If you select On there will be a buzzer sound and "H" sign on screen
when HDD is not detected or not formatted; on the contrary, if you close the function, there is only "H" sign to
indicate HDD not found, but no alarm sound when HDD not found or not formatted.
HDD SPACE: Options are On and Off. When the alarm function is on, there are alarm sounds when the
HDD is running out of space; when the function is off, there are no alarm sounds.
VIDEO LOSS: Options are On and Off. When the function is on, system will issue alarm sound and
display video loss on the preview interface; when the function is off, system will have no alarm sound, but the
preview interface will display video loss.
ALARM MANAGE
duration time 0 s, 30s, 1minute
（
A l a r m T y p e
S e n d s a l a r m w h e n D V R c a n ' t r e c e i v e v i d e o s i g n a l ( s u c h a s c a m e r a d a m a g e , c a b l e b r o k e n o r
V i d e o L o s s V i d e o L o s s V i d e o L o s s V i d e o L o s s
W h e n a n o b j e c t m o v e s i n t o m o t i o n d e t e c t i o n a r e a , a l a r m w i l l b e t r i g g e r e d . Y o u c a n a d j u s t s e n s i t i v i t y
M o t i o n D e t e c t i o n M o t i o n D e t e c t i o n M o t i o n D e t e c t i o n M o t i o n D e t e c t i o n
I / O S t a t u s I / O S t a t u s I / O S t a t u s I / O S t a t u s S y s t e m c a n c o n v e r t a l a r m s i g n a l t r i g g e r e d b y e x t e r n a l s e n s o r i n t o s i g n a l i d e n t i f i e d b y s y s t e m .
W h e n H a r d D r i v e i s n o t d e t e c t e d ( H D D d a m a g e , p o w e r s u p p l y m a l f u n c t i o n ) , o r H D D a u t o - o v e r w r i t e i s
H D D l o s s H D D l o s s H D D l o s s H D D l o s s
When you install a HDD, the system will automatically detect
if HDD is formatted or not; If HDD needs to be formatted, HDD
status will be shown as "Not format", otherwise, the HDD status
will be shown as "Normal" (refer to Picture 5-31)
TOTAL SPACE: Indicates total space available on Hard
Drive.
FREE SPACE: Indicates unused space available on the
Hard Drive.
USEABLE
detail/quality and frame rate, system will show you how
Recording time you have left on the Hard Drive.
Click [Main Menu Device
menu to setup Alarm warnings (shown as Picture 5-32).
I/O STATUS
(Normal-close) and OFF. Set to "Normal-open" if you use external
sensor alarms that are normally open, Set to "Normal-close" if you
use external sensor alarms that are normally closed, set to "off" if you
are not going to use external sensor alarms. You can use the DVRs
A larm Output 0 s,10s,20s,40s,60s
： （
2 minute 5 minute
， ，
REC TIME: Based
Alarm] to enter into [Alarm setup]
Options include NO (Normal-open), NC
：
B uzzer time (0s,10s,20,40s,60s) and alarm
） 、
） 。
F u n c t i o n
21
User Manual
on current image