2: Password; 3: Video Setup; 4: Language; 5: Info - Q-See QR4074 User Manual

QR4074 User Manual

5.2.8.2: Password

Click on [Main menuSystemPassword] to adjust your system's password
settings. This will generate a Password Setup dialog box that will allow you to
enable or disable password protection and also set up an administrator
password (Picture 61). Turning your Password Enable setting to "On" will
generate a User Password field and Administrator Password field to populate.
The password option supports up to 6 characters.
(Picture 61)

5.2.8.3: Video Setup

Click on [Main menuSystemVID] to adjust your system's video
preferences. This will generate a Video Setup dialog box (Picture 62) where
you can set your Video System settings to PAL or NTSC (NTSC is standard in
the USA). Please note that this model is not equipped with a VGA port so
the ability to adjust your system's VGA resolution settings is not supported.
(Picture 62)

5.2.8.4: Language

Click on [Main menuSystemLanguage] to adjust your system's Language
preferences. The [System Language] menu will appear as illustrated in
Picture 63. Choose the language you want to use on your DVR from the drop
down menu then click [APPLY] button. The selection will be available after
system Auto restarts.
(Picture 63)

5.2.8.5: Info

Click the [Main menuSystemInfo] to view your system's device type,
software version and your MAC address.

5.2.8.6: System Maintenance

Click the [Main menuSystemMaintain] to access the System Maintain
menu as shown in Picture 65. This menu allows you to reset the DVR to
factory default settings, update system software (firmware), and set system
(Picture 64)
auto-maintenance. Setting your Auto Maintain option to "On" in the drop down
menu will set your DVR to automatically check for updates on restart and you
can also update your system manually by clicking on the [System Update]
button. Please note that you must click on the [Apply] button in order for any
changes to take effect.
(Picture 65)
28