Enable Auto-Sequence; Setup Color Hue, Brightness, Contrast And Saturation - Q-See QSDR74RTS User Manual

enable auto-Sequence

To set the system to automatically rotate the screen view image for each camera:
1. From the camera setup interface, select the AUTOSEQ button
2. The AUTO ROTATION sub menu will appear (
3. Select the amount of view time, from 0 to 10 seconds, for each camera from
the drop-down list.
4. To set the rotation time for all cameras to 5 seconds, select DEFAULT.
5. When finished selecting times, select APPLY and then EXIT to close the AUTO
ROTATION menu
Note: changes will only be saved, when you select APPLY before exiting

Setup Color hue, brightness, Contrast and Saturation

To adjust the image brightness, saturation, contrast and hue settings for each camera,
from the camera setup interface:
1. Under the COLOR column, select the SETUP button
2. The COLOR SETUP sub menu will appear (
3. Make desired changes by sliding the vertical line along each axis
4. Select DEFAULT to reset all values to the original factory installed settings
5. To close the window without applying changes, select EXIT, before selecting APPLY
6. To save changes, select APPLY
7. A prompt will appear to save your settings, select OK in order for the changes to take effect.
Note: changes will only be saved, when you select APPLY before exiting
IMAge 8
)
IMAge 9
IMAge 9
)
19