Search Recordings - Q-See QSDR74RTS User Manual

5. Set the camera's position by clicking the SET button and move the camera to the
desired position by using the arrows. Select the SET button again to save this
position.
6. To removes changes made to the settings, select CLEAN
7. Click the SAVE button for the set up to save the cruise settings.
GOTO: Select the GOTO button to access specific pre-selected points
Note: this DVR model supports up to 100 pre-set points but the PTZ camera may be limited to different
number of pre-set points.

SeaRCh ReCoRdinGS

To search previously recorded video, use the following steps:
1. From the MAIN MENU, select SEARCH to open the VIDEO SEARCH menu (
2. To search video by a specific date, enter the desired date into the VIDEO FILE field
by clicking on the left mouse button and entering the numbers from the drop down
keyboard
The FILE LIST shows all available files by channel and type
3. From the VIDEO SEARCH screen, select SEARCH, then select the FILE LIST button to
generate the FILE LIST submenu (
4. Search through the list of recorded files
The buttons on the FILE LIST interface are:
FIRST: This is the first page of recording history searched. When viewing other pages, clicking
the FIRST button returns the screen back to the first page.
PREV: Returns the screen to the previous page (except the first page).
NEXT: Moves the screen to the next page (except the last page).
LAST: When viewing other pages, clicking the LAST button takes the screen to the last page.
ALL (Select All): Selects all the events on current page.
REVERSE: Selects the opposite events than are currently selected.
50
IMAge 64
)
(all, normal, or alarm triggered files)
IMAge 63
)