Audio; File Size; Customizing Record Mode - Q-See QSDR74RTS User Manual

audio

Select enable or disable to turn the audio input on or off. When the audio is turned off,
the DVR system will not record audio and you will not hear sound during playback of your
recorded events.

File Size

Select the FILE SIZE drop-down list to set the maximum recording time for all recorded files to
be 15, 30, 45 or 60 minutes in length

Customizing Record mode

Select the REC MODE drop-down list and choose to record 24 hours a day, on a set schedule
or when motion is detected.
1. To record 24 hours a day, choose the ALWAYS option.
2. To record on motion or a set schedule, select Time Schedule Record and select the
"Schedule" option and the SCHEDULE interface will open (
Note: For detailed motion detection setup, please read: "Device Management / Motion Detection"
3. Choose from the channel drop-down menu to adjust the recording options for all
cameras
4. Or to set the recording parameters for each camera separately choose each camera
from the drop down menu
5. To set up the recording by day use the drop down menus labeled "From" and "To" and
select times
6. Selecting the ALARM (motion record), GENERAL (always record) and NO RECORD
boxes allows further customization for each recording time and day
7. The Default recording schedule is as follows:
hR 01:00 am - 07:59 am: noT ReCoRdinG
hR 08:00 am - 18:59 pm: noRmal ReCoRdinG
hR 19:00 pm - 00:59 pm: alaRm ReCoRdinG (ReCoRd on aCTiviTY oR alaRm onlY)
8. To close the window without applying changes, select EXIT, before selecting APPLY
9. To save changes, select APPLY
10. A prompt will appear to save your settings, select OK in order for the changes to
take effect.
Note: changes will only be saved, when you select APPLY before exiting
IMAge 11
)
21